Available in the following finishes. Black, Blue, Red, Orange, and Polished
$74.99 For standard colors
$124.99 For Polished
Yamaha Rhino 660 686cc Big Bore Kit
Part: n/a
Trinity Racing's 686cc big bore kit will set your new Rhino 660 apart from the crowd. Featuring improved oiling properties over the stock piston, this kit will last long and give you the power you crave.
The 686cc kit includes a JE forged piston, a bore and hone of your Rhino cylinder and a top-end gasket kit.
$711.55 Price includes core charge. Cylinder core must have 101.50mm or less for refund
Actual photo may vary.
MEET OR BEAT PRICING! ON ANY VALID ADVERTISED PRICE...
FLUIDYNE YAMAHA RHINO 660 HIGH PERFORMANCE RADIATOR
(2004-2007) Part: FPS11-4RHINO
• 38mm cores provide 50% more surface area for increased cooling capacity.
• Rugged furnace brazed cores feature optimum air fin design and .060 aluminum tubesheets.
• Heavy duty aircraft grade aluminum tanks and side plates provide increased strength and durability which eliminates the need for auxiliary guards or braces.
• All parts include a 16 lb. radiator cap matched to a CNC machined billet filler neck.
• All assemblies are TIG welded by highly experienced craftsmen.
• Direct fit design - no installation modifications required.
• Race proven by Baja 1000 and GNCC winners.
$474.95
Yamaha Rhino 660 High Performance Clutch Kit
Having a hard time getting your Rhino to put power to the ground? If that's the case, Trinity Racing's high performance clutch kit is perfect for you. Featuring a new slope on a new replacement clutch sheave and new rollers, this kit puts more power to the ground faster than the stock unit.
WE HIGHLY RECOMMEND THE HEAVY DUTY CLUTCH BELT WITH THIS MODIFICATION.
IF YOU OR YOUR MECHANIC IS GOING TO CHANGE YOUR CLUTCH YOU MIGHT AS WELL UPGRADE YOUR CLUCTH BELT ALSO, TO SAVE YOU MONEY AND TIME LATER
$249.99
Yamaha Rhino 660 Heavy Duty Clutch
BeltPart: WE261010
Yamaha Rhino 660 Drive belt Double-cog style belt helps reduce clutch heat Aramid tensil cord provides higher load capabilities and less slip. Rubber compound allows for the right amount of flexibility. Built for performance with higher quality and closer tolerances; closer tolerances provide a better fit on clutch.
This Trinity Racing belt is specifically built for any engine upgrades. This belt will give you longer lasting performance, harding pulling power, than OEM belt.
PERFECT IF YOU HAVE MOTOR WORK OR LONG TRAVEL KIT $109.99
Yamaha Rhino 660 Connecting Rod
A stock stroke connecting rod for your Yamaha Rhino 660.
$254.99
Yamaha Rhino 660 Dyna Ignition
The Dyna FS is a direct plug in replacement of the stock ignition that plugs into the stock harness. This Dyna box produces a longer and more intense spark than the stock ignition, adding power & torque. The Dyna FS ignition reprograms your Rhino to release that power with 4 ignition advance curves - 3 high performance and 1 stock curve- which you can easily choose from as you ride.
Hot Rods is proud to introduce its stroker ATV crankshaft line.
A Stroker Crank gives your piston more travel up and down creating more displacement, which greatly increases Torque & Horsepower.
This will give your engine more mechanical leverage to generate more power at lower rpm much more easily.
NOTE: Pictures may not reflect actual product that will ship, product will vary with Make, Model and Year. If you have any questions about this product, please call 1.877.FASTOYS.
$369.99
Yamaha Rhino 660 High Performance Camshaft
Improve your Rhino 660's performance with a high performance camshaft! With a steeper lobe than stock, this is a simple bolt-on modification that will unleash the power in your Yamaha.
$164.99
Yamaha Rhino 660 Standard Compression Piston
Get a stronger and more reliable JE piston to replace your stock unit. Made of forged aluminum, this piston and is a direct replacement for your stock piston.
$190.99
Yamaha Rhino 660 High Compression Piston 100mm 12:1 for all models (Race gas only)
Part: 261526
Get the most out of your race fuel powered Rhino 660 with this high-compression piston from JE! Shake up the potential in your Rhino with this high-quality piston kit today! Made of forged aluminum, this piston offers increased protection and is a direct replacement for your stock piston.
$225.99
Yamaha Rhino 660 Valve Guides
Part: n/a
Featuring better wear resistance and heat conductivity over the stock units, these valve guides are perfect for heavily modified Rhino engines.
$79.99
Yamaha Rhino 660 Valve Springs
Specifically designed for high RPM, high horsepower engines, these valve springs ensure long life and reliable performance, especially when paired with a high performance camshaft.
$164.99
Yamaha Rhino 660 CVT Filter Kit
A transmission filter kit for your Yamaha Rhino 660 that includes a K&N filter and Outerwear.
$59.99
Available in the following finishes. Black, Blue, Red, Orange, and Polished
$74.99 For standard colors
$124.99 For Polished
Yamaha Rhino 660 686cc Big Bore Kit
Part: n/a
Trinity Racing's 686cc big bore kit will set your new Rhino 660 apart from the crowd. Featuring improved oiling properties over the stock piston, this kit will last long and give you the power you crave.
The 686cc kit includes a JE forged piston, a bore and hone of your Rhino cylinder and a top-end gasket kit.
$711.55 Price includes core charge.
Actual photo may vary.
Yamaha Rhino Pro-Port Porting
Porting is a highly technical and intricate part of any performance engine package and has been one of our specialties for over 30 years. We invest countless hours yearly in R&D allowing us to offer our customers the highest quality and performance possible. This investment keeps us one of the Industry leader’s in High-Performance Porting. We have the expertise and the equipment to maximize peak performance throughout the full power band, giving you optimal performance without compromising reliability and engine life.
With the use of our Superflow flow bench with port flow analyzing computer software we can map out specific areas within the ports using pitot tubes of different shapes. These tools allow us to see air speeds through out the port enabling us to achieve maximum port efficiency.
Testing port velocity and port stability is the only way to insure getting the most usable CFM (cubic feet per minute) from every lift point. The use of computer monitored flow benches are an excellent way to measure and diagnose port designs, ensuring maximum performance. The use of this equipment also helps determine cam design and valve size for specific riding requirements.
Trinity Racing uses state of the art technology and techniques to create the perfect port job according to your unique specifications.
Trinity Racing porting services has produced major contenders and winners in many top-level championships, such as the ITP Quad Cross Series Championship, Grand National Open Pro Am Championship (Banshee), Four-Stroke World Championship and the Grand National Championships with some of the biggest names in the sport, Kory Ellis, Mark Ehrhardt, Jeremy Schell, Jeff Seegott, Joe Byrd.
HERE IS WHAT QUAD MAGAZINE HAD TO SAY. Trinity Racing's flow-bench-tested port jobs are designed to make your quads head flow better and more consistently, creating more horsepower, as well as improving where your quad makes power. Trinity Offers an exchange program to keep your downtime to a minimum.
Call Now!
$412.50
Actual photo may vary.
Yamaha Rhino Valve Job
Part: n/a
Call for Details.
$130.00
Questions about pricing and availability?
Please call 1.877.FASTOYS for details about this product.
All prices are subject to change without notice.
Copyright 2000-2008 Trinity Racing, All Rights Reserved.
Comments or questions about Trinity Racing, contact Charity Fortajada.
The URL of this page is http://www.trinityracing.com
MEET OR BEAT PRICING!
